Make replacing path with stair or gates easier (build over roads)
When I want to replace a path with a stair, I have to remove a path before putting a stair.
It is handy if I can simply put a stair on an existing path and it will be removed automatically before the stair is actually placed.
Comments: 37
-
25 Sep, '21
Gin Fuyou AdminI've changed title to include district gates since it seem to be same case to me
-
27 Sep, '21
Thaina YuI think it should be grouped with this post
https://timberborn.featureupvote.com/suggestions/216331/qol-allow-placing-upgrades-on-existing-buildings -
13 Oct, '21
Gin Fuyou Admin"erase roas" (suggested by toto on 2021-10-12), including upvotes (1) and comments (0), was merged into this suggestion.
-
30 Oct, '21
Lee Ju Hyung Mergedby the way game is so good
-
01 Nov, '21
Gin Fuyou Admin"Please make District Gate can be overwritten on street" (suggested by Lee Ju Hyung on 2021-10-30), including upvotes (1) and comments (0), was merged into this suggestion.
-
03 Nov, '21
Verduisont MergedAllow building of district door on existing path.
Allow destruction of district door wihtout removing path.
Can be good to also keep possibillity to remove district door and path in the same time. -
03 Nov, '21
Gin Fuyou Admin"Suggestion: Build district door on path" (suggested by Verduisont on 2021-11-03), including upvotes (1) and comments (0), was merged into this suggestion.
-
17 Nov, '21
Daniel MergedIt's not uncommon for me when redoing a piece of pathing to put stairs somewhere that I already have a path build. It's extra work to destroy path, then place stairs. Seems like the stairs could just be 'buildable' on the path right away, and replace it.
I'm not sure how the engine is coded, but to be extra specific - there are already entities in the game where 'building over' is possible (like tree stumps). -
18 Nov, '21
Gin Fuyou Admin"QOL: Allow building stairs on existing path (replacing the path)" (suggested by Daniel on 2021-11-17), including upvotes (1) and comments (0), was merged into this suggestion.
-
21 Nov, '21
noisyPitta MergedSince rope bridges and stairs both connect to paths when you set it up right, would it be possible to make them able to be placed on the path. For instance, in the attached image, I wouldn't be able to place a stairs on the highlighted tile, since the path is there. I think it would work better if I was able to place the stairs here and it would simply remove the path, seeing as the stairs automatically have a path anyway. Same goes with the rope bridges.
-
21 Nov, '21
Gin Fuyou Admin"Stairs and Bridges should be placeable on paths" (suggested by noisyPitta on 2021-11-21), including upvotes (1) and comments (0), was merged into this suggestion.
-
05 Jan, '22
anthony wood MergedIt is really annoying having to delete a path to build on that space.
-
05 Jan, '22
Gin Fuyou Admin"Allow build on paths" (suggested by anthony wood on 2022-01-05), including upvotes (1) and comments (0), was merged into this suggestion.
-
04 Feb, '22
Chandarin MergedHaving to go back and delete paths to build as building or plant a crop just seems unnecessary. Selecting a building zone that overlaps a current path should bring up a confirmation window warning you what you are about to do, just like when you delete a path anyways. This would be especially helpful with stairs, for example, but also for new players who get frustrated with remembering where everything is.
-
08 Feb, '22
Gin Fuyou Admin"Build over paths, confirmation only" (suggested by Chandarin on 2022-02-04), including upvotes (1) and comments (0), was merged into this suggestion.
-
17 Oct, '22
Pixies MergedAnd path can replace district gates. It save the time to : select, destruct, choose construct, select, construct.
-
31 Oct, '22
Gin Fuyou Admin"District gates automaticly replace path" (suggested by Pixies on 2022-10-17), including upvotes (1) and comments (0), was merged into this suggestion.
-
14 Nov, '22
Jesse MergedI saw this buried in a comment somewhere but not actually posted. It's one of the biggest things I wish for on a regular basis during a play-through. I'd like to be able to simply pop a district gate on top of a path without having to delete the path first, or vice versa.
I'm moving districts and district borders around quite a bit to achieve different goals (big builds or clearing land) and it would simplify the process a lot if I didn't have to delete paths every time I want to place a gate. Similarly, if I want to remove a gate and replace it with a path, it would be nice not to have to hit delete (obviously it would only work if I'm not trying to put the path between two existing districts, where a gate belongs). -
20 Nov, '22
Gin Fuyou Admin"Let Us Place District Gates On Top of Paths" (suggested by Jesse on 2022-11-14), including upvotes (1) and comments (0), was merged into this suggestion.
-
03 Jan, '23
LEE MergedHaving to delete a path in order to place the gate is both time consuming and frustrating.
-
09 Jan, '23
Gin Fuyou Admin"You should be able to place a district gate right on top of a path" (suggested by LEE on 2023-01-03), including upvotes (1) and comments (0), was merged into this suggestion.
-
23 Jan, '23
tibbakoi MergedIt's irritating to have to click so many times to demolish building, then click the path, then click back to build district gate, then click in the gap I just made. Can the district gate be allowed to be built on top of a path and convert it?
-
07 Feb, '23
Gin Fuyou Admin"Enable district gates to be placed on top of paths" (suggested by tibbakoi on 2023-01-23), including upvotes (1) and comments (0), was merged into this suggestion.
-
19 May, '23
Andrius Chamentauskas MergedWhen covering large area with explosives you have to add additional paths because beavers can't build further than 10 tiles from path. Then you place your explosives and wait for area to be covered. Once it's covered you now have to delete some paths and place explosives into empty tiles. Then delete some more & place some more until you cover the whole area. It's very annoying to do, so would be nice if you could simply place explosives on top of paths or range limit would not apply to explosives.
-
22 May, '23
Gin Fuyou Admin"Allow putting explosives on paths" (suggested by Andrius Chamentauskas on 2023-05-19), including upvotes (1) and comments (0), was merged into this suggestion.
-
04 Aug, '23
R.W. MergedAll the roads！People need to erase it first before building someting on it. It is too annoying. It would be better if construction can be made on a road.
-
08 Aug, '23
Gin Fuyou Admin"Please enable construction of stairs on roads" (suggested by R.W. on 2023-08-04), including upvotes (1) and comments (0), was merged into this suggestion.
-
12 Aug, '23
Boflar MergedWhen you try to build a bridge it will not lock onto the tile if there is already a path there, Idk if it is intentional or not that the rope is its own locked-straight path but it would be a small qol change for it to be built on top of paths so we don't have to fidget with selecting the path tile on big structures
-
16 Aug, '23
Gin Fuyou Admin"Suspension Bridge" (suggested by Boflar on 2023-08-12), including upvotes (1) and comments (0), was merged into this suggestion.
-
30 Sep, '23
ChrispyK412 MergedIf you have already laid out a path on a tile where you need a stair, the stair should automatically clear the existing path. Currently you have to manually remove the single tile of path.
Small QOL change. -
01 Oct, '23
Gin Fuyou Admin"Stairs Automatically Deletes Path" (suggested by ChrispyK412 on 2023-09-30), including upvotes (1) and comments (0), was merged into this suggestion.
-
11 Oct, '23
dave Mergedsure would be a quality of life feature to not have to delete paths to place explosives.
-
12 Oct, '23
Gin Fuyou Admin"Place explosives on paths" (suggested by dave on 2023-10-11), including upvotes (1) and comments (0), was merged into this suggestion.
-
13 Oct, '23
JimJust.. always build over paths.
It may have been important when you had to wait for beavers to construct paths, but now its just more clicks to work around things.
Build over paths. No confirmation dialog. For the one time I mess up, I can just build again. -
13 Oct, '23
Gin Fuyou AdminJim it was tried in early update. Completely terrible experience, pretty sure it won't be back.
-
14 Oct, '23
Ryan Hatt MergedIt would be really nice if the building tool would allow for placing levees on top of levees that already have paths, and then automatically placed a path on top of those levees.
Ideally this would work with any building that supports having a path on top of it. The preview could be shaded yellow similar to buildings with power transfer points that are blocked. A pop-up could be added informing that the build interferes with paths, and then asking if we want to delete the paths, move them to the top of the new building, or cancel the build.
This would save a lot of time on large dam projects and general construction stuff. -
16 Oct, '23
Gin Fuyou Admin"QoL automatic repathing on levees/buildings" (suggested by Ryan Hatt on 2023-10-14), including upvotes (1) and comments (0), was merged into this suggestion.